Chain Breaker
Roller chain breaker is a special tool for chain disassembly. When the chain is too long and the length needs to be modified, you can easily disassemble it.
Category: Roller Chain Tools
| Chain Breaker Specifications
Roller Chain Breaker (Small)
- For chain size pitch 6.35mm~19.05mm
- Both BS and ANSI series roller chain can use
- Packing: 54PCS / Carton
Roller Chain Breaker (Large)
- For chain size pitch 19.05mm~31.75mm
- Both BS and ANSI series roller chain can use
- Packing: 36PCS / Carton
| How to use a chain breaker?
Step 1
Mark the pins or plate where you need to break the chain. Clamp the breaker jaws over the chain to make the breaker pin lines up with the chain rivet.
Step 2
Tighten the chain breaker to push the rivet through the top chain plate. It's normally best to apply a bit of pressure to each rivet alternately.
Step 3
Once both rivets have been pushed through the plate, the link could slide out from the chain. You may need a tap with a hammer and a punch as some rivets can be tight.
